The tie is not in place and there is an empty strike
The occurrence of this situation in the nylon strapping machine may be due to an error in the operating process, such as insufficient feeding, failure to turn on the auxiliary feeding air blowing, and the problem with the machine may be due to irregular strapping blockage, resulting in the inability to feed. The solution is to increase the feeding stroke, connect the auxiliary feeding air blowing to compressed air, and then open the guide rail cover to remove the irregular strapping. If the strap stopper is loose, place a strap at the guide rail position, press the back buckle tightly, and then adjust the strap stopper to the position where the strap is perpendicular to the front buckle groove!
Recommended News
The incision of the tie is too long or uneven
